[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide
Q.
I can’t calibrate my digital stylus well.
I can’t calibrate my digital stylus well.
A.
Please check following points if you can’t finish to calibrate your digital stylus.
[The plastic protection cover]
The plastic protection cover may be stuck on the receiver.
You can’t calibrate the digital stylus if the cover isn't peeled off.
Please peel off it from the receiver.
[Calibration time]
The mark of the calibration position isn’t moved for improvement of the calibration precision if the ibisPaint can’t get the enough data while the tip of the iPen is pressed.
Please continue to press the tip about one second when you calibrate the iPen.
Please check following points if the position slips off.
[An angle of the pen]
The pen position is different if an angle of the pen is different because of the specification of the digital stylus.
Therefore the position will be different if you calibrate the pen perpendicularly.
Please hold the pen the same way as time to draw lines when you calibrate the digital stylus.
[The device direction]
The pen position is different by the direction of the screen because of the specification of the digital stylus.
Therefore the position will be different if you draw lines by the iPen at the different screen direction.
Please calibrate the digital stylus the same screen direction as time to draw lines.
[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide