[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide

Q.
How do I use the A-pen on the ibisPaint?


A.
The ibisPaint and the ibisPaint X supported the A-pen of Yifang Digital Technology Co., Ltd from ver.2.5.0.
We're going to explain here how to use the A-pen on the ibisPaint.

  1. Tap "+" button in the My Gallery and the canvas screen will appear.
  2. Tap the tool selection button which is the left most in the toolbar in the bottom of the screen.
  3. Tap the configuration button (it's a gear icon) in showed tool selection popup and the Configuration window appears.
    4. Only on the iPad: Check whether "Digital Stylus" of the Configuration screen shows "No Selection" or "Not Connected:Yifang Digital A-pen".
  4. Only on the iPad: If it doesn't show, tap the button and tap "Yifang Digital A-pen" button in shown popup.
  5. Connect the Receiver of the A-pen to the device.
  6. Tap "Configuration" button in the iPad, or the button of a gear icon in the iPhone/iPod touch.
  7. The calibration window will be shown. Hold the pen of the A-pen the same way as time to draw lines.
  8. Adjust the tip of the pen to the crosshair mark precisely and press the tip to the screen.
  9. The crosshair will move if you release the tip after sometime. Press the tip of the pen again in the same way in the position that moved.
  10. The message will be shown if the calibration is successful.
The preparation to use the A-pen completed.

Please do followings if you want to disconnect the A-pen.
  • Remove the Receiver of the A-pen from the device.
  • Tap the "Connected:Yifang Digital A-pen" button in "Digital Stylus" of the Configuration window and tap the button except "Yifang Digital A-pen" button in shown popup.

The A-pen has the palm rejection. This function ignores your hands while you draw with the A-pen.
The palm rejection enables while the Receiver detects the pen (The mark of the pen position is shown).
Therefore, please move the A-pen to somewhere that the A-pen isn't detected by the Receiver if you zoom in or zoom out or move the canvas.

Was the problem solved?

 It is solved.
 It is not solved. I inquire about it.


[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide


Language