[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide

Q.
How do I use the MVPen on the ibisPaint?


A.
The ibisPaint and the ibisPaint X supported the EN309i of the MVPen Technologies Ltd. from ver.2.5.0.
We’re going to explain here how to use the EN309i on the ibisPaint.

  1. Tap “+” button in the My Gallery and the canvas screen will appear.
  2. Tap the tool selection button which is the left most in the toolbar in the bottom of the screen.
  3. Tap the configuration button (it’s a gear icon) in showed tool selection popup and the Configuration window appears.
    4. Only on the iPad: Check whether “Digital Stylus” of the Configuration screen shows “No Selection” or “Not Connected:MVPen EN309i”.
  4. Only on the iPad: If it doesn’t show, tap the button and tap “MVPen EN309i” button in shown popup.
  5. Connect the Receiver of the EN309i to the device.
  6. Tap “Configuration” button in the iPad, or the button of a gear icon in the iPhone/iPod touch.
  7. The calibration window will be shown. Hold the pen of the EN309i the same way as time to draw lines.
  8. Adjust the tip of the pen to the crosshair mark precisely and press the tip to the screen.
  9. The crosshair will move if you release the tip after sometime. Press the tip of the pen again in the same way in the position that moved.
  10. The message will be shown if the calibration is successful.
The preparation to use the EN309i completed.

Please do followings if you want to disconnect the EN309i.
  • Remove the Receiver of the EN309i from the device.
  • Tap the “Connected:MVPen EN309i” button in “Digital Stylus” of the Configuration window and tap the button except “MVPen EN309i” button in shown popup.

The EN309i has the palm rejection. This function ignores your hands while you draw with the EN309i.
The palm rejection enables while the Receiver detects the pen (The mark of the pen position is shown).
Therefore, please move the EN309i to somewhere that the EN309i isn’t detected by the Receiver if you zoom in or zoom out or move the canvas.

Was the problem solved?

 It is solved.
 It is not solved. I inquire about it.


[*]Category's Question List
[0]Product FAQ Top
[#]Product Guide


Language